When considering any electronics purchase there is usually more than enough brands and models to choose from and it can even start to get confusing for the average person who is not an electronics equipment whiz. Fortunately, the internet is a vast storehouse of independent consumer ratings and if you do some homework you can usually spot the top products very quickly. When looking for stereo receivers these days there are a few features that come to mind that should be included on the latest models to really give you the most for your money as the digital entertainment age comes into it's own. One is that unlike receivers of the past, today's stereo receivers need to incorporate video into the mix as well as audio capability. For years a home receiver was used mainly for the home audio system, but now a typical home entertainment setup requires a receiver to process video signals as well. A modern receiver would also be able to decode and process both Dolby and DTS 5.1 surround sound and support the 5 speakers and subwoofer that is required for creating a true surround sound experience. The receiver should have plenty of inputs for the audio/video devices that will be used with it and a variety of connections for those devices to insure the best audio and video quality. With all of that in mind, we have found that two digital receivers have the features and positive reviews that we like to see to be able to meet the needs of most people. And here they are: 1. The Yamaha RX-V650 is a great receiver that produces clean, crisp sound and can actually function well with either 4 ohm or 8 ohm speakers, which can be important if you aren't sure what your speaker setups's ohm rating is. It also develops plenty of power, being rated at close to 100 watts per channel. That amount of power will fill even the largest rooms with sound. The rear video inputs are: Composite: 4, Component: 2, S-Video: 4, and the video outputs are Component: 1, Composite: 2, S-Video: 2. There are 4 rear audio inputs and two outputs. This receiver will also support on up to Dolby 7.1 surround sound. It costs just under $400 online and is a great piece of equipment for most home theater needs. 2. The Panasonic SA-XR50 - This is a less expensive digital receiver that still delivers great value and performance by all accounts. It supports up to 6.1 surround sound and puts out 100 watts per channel of power making it an easy choice to power speakers effectively even in large rooms. The audio inputs are: 4 A/V, 1 coaxial, 1 optical; and the video inputs are 3 composite, 3 S-video, 2 component. This receiver often sells for under $300 online making it a great bargain. Either receiver mentioned above would no doubt make a fine purchase for either your home stereo or home theater needs as both are highly rated in most online stereo receiver reviews. There are also other fine receivers available though, and it's always good to make a thorough search to find the one that fits you best. |
